Home
1
Hot News
2
Application articles / Other
3
Production lines / Operating area to replace the thin OSRAM LED Panel Light4
http://www.prodigital.com.tw/en/ Prodigital Technology Corp.
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C.
This time we introduce the performance of fully-filled LED soft strip lights. The original LED step lights used sleeved LED soft strip lights and LED glue strip lights. These two models are known in the industry as having an IP65 rating, but this approach is not recommended for use in outdoor engineering cases or LED landscape cases. Difference description: A.LED sleeve soft strip lights are actually composed of bare board + silicone sleeve, achieving dustproof and waterproof. 1. When the LED is hit by a frontal impact, the silicone sleeve is soft and does not protect the internal LED. 2. The inlet end of the casing must be properly protected to avoid water intrusion due to pulling and rupture after construction. 3. When the waterproofing of the on-site wiring is poor, water or moisture will penetrate the copper wire's cooling and heating effects, causing siphonage and water intrusion. B. LED glue strip lights are covered with a layer of PU glue on the exposed LED board to achieve dustproof and waterproof on the front. 1. The main disadvantage of the LED flexible strip light is that the back is not waterproof Outdoor lighting mainly depends on the quality of the product itself + the quality of on-site construction to extend its service life. Factory customization Recommended length: DC24V length 20 meters double-ended power supply, DC12V length 10 meters double-ended power supply Color temperature range: 2700K ~ 6500K Power range: 5W ~15W/meter, single row Waterproof level: IP68 Outlet method: 2 wire length < 10 meters Leave a waterproof layer on the front and back of the PCBA LED soft board, and tightly cover the LED and soft board. The wires are also wrapped in adhesive material, and the outer layer has a heat-shrinkable sleeve to enhance waterproofing and reduce the pulling force that may cause the adhesive material to break. After learning about the product, go to the construction site to see actual performance. Removing glue from lamp power wiring hole cover Clear the original LED glue strip lights and LED tube soft strip lights operations, Site bonding requires silicone to reinforce waterproofing Use a scraper to remove it and it will almost become crispy! Removing old silicone takes a lot of time!! Take out the arrangement position of LED soft strip lights Peel off the 3M adhesive on the back and press along the edges to fix it! After pressing, apply glue to the power hole. The 3M adhesive tape is only for temporary fixation. In actuality, the upper and lower edges of the LED flexible strip lights and the joints with the wall must be firmly covered with a layer of glue to prevent them from falling off. Fixed completed appearance Actual effect at night   LED soft strip light products https://www.prodigital.com.tw/en/product_cg257608.html Introduction to various types of LED soft strip lights  https://www.prodigital.com.tw/en/hot_362663.html http://www.prodigital.com.tw/en/hot_471661.html Taiwan Hsinchu Community Landscape LED Step Light LED Outdoor Full Glue-filled Soft Strip Light Construction Case 2024-03-01 2025-03-01
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. http://www.prodigital.com.tw/en/hot_471661.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. http://www.prodigital.com.tw/en/hot_471661.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-01 http://schema.org/InStock TWD 0 http://www.prodigital.com.tw/en/hot_471661.html

36-watt OSRAM LED ultra-thin plate lights & lighting installation process evaluation.
Use LED light source 100PCS replace T8 light source 138PCS.

Production work area PD-PL 36W  panel light

PD-PL 36W  panel light

A area using T8 / T-bar 91 PCS, power consumption 7.28kw / h

LED Panel light Application

B area using T8 / T-bar 47P CS, power consumption 3.76kw / h

LED Panel light Application

A + B total 11.04 kw/h, tariff calculation:

8hx 11.04kw/h x $4.5➨NTD397.44/Day

 ➨NTD104,924/year 

Before replacing the photo.

T-bar fluorescent lamp

T-bar fluorescent lamp

After evaluation recommendations,
the owners use our new program to replace the lamp position.

A area is reduced from 91PCS to 63PCS

LED panel lamp

B area is reduced from 47PCS to 37PCS.
Lamps reducing the total 38PCS, decline of 27%.

LED panel lamp

After replacing the A area and B zone total power consumption, the remaining hour 3.6kw / h
Day tariff calculation:

8hx 3.6kw/h x $4.5➨NTD129.6/Day

➨NTD34,214/year 

1 year save NTD70,710 !!! (67% reduction in electricity bills.)

---------------------------------------------------------------------------

Using Simulation software planning lighting position to avoid insufficient illumination!

Floor height of 2.6 m, an average illuminance planning desktop 550 ~ 700lux. 

LED panel light Illumination Simulation

LED panel light Illumination Simulation


Simulation than after, the planning installation time.
---------------------------------------------------------------------------

Day 1:
Before installation, the main items covered to avoid dust and rat feces fall.

LED panel light install

Removing the old lamps

LED panel light install

By planning the installation of lighting.

LED panel light install

According to the requirements of owners retain some lamps.

LED panel light install

The next area.

LED panel light install

Replacing lamps also keep the environment clean and tidy.

LED panel light install

LED panel light install

Lamp holder and lamp separation recovery!

LED panel light install

Lampholder recovery! 

LED panel light install

LED panel light install

-----------------------------Day 1 END---------------------------------
Day 2 : 

LED panel light install

LED panel light install

LED panel light install

LED panel light install

Lamp holder and lamp separation recovery!

LED panel light install

Lampholder recovery! 

LED panel light install

LED panel light install

B area illuminance measurements.

LED panel light Illuminance Measurement

LED panel light Illuminance Measurement

LED panel light Illuminance Measurement

LED panel light Illuminance Measurement

LED panel light Illuminance Measurement

LED panel light Illuminance Measurement

A area illuminance measurements.

LED panel light Illuminance Measurement

LED panel light Illuminance Measurement

 

LED panel light Illuminance Measurement

LED panel light Illuminance Measurement

Conclusion :

1. Lamp less 38PCS.
2. The power consumption drops 15,713.28kw / years.
3. The cost savings NTD70,710 / years.
4. Life of up to 40,000 hours.
5.UV free.
6.eye safety.
7. enhance lighting quality.
8. reduce the indoor temperature 2 to 3 degrees.
9. easy to clean, reducing maintenance costs.
10. The two-year warranty, the new replacement.

Using OSRAM 5630 LED intensity higher than 2835 commercially available.
2 meters Panel Light illumination 360lux,
better than the commercial lighting 250lux ~ 300lux performance.
Each batch are tracked by integrating sphere record.

LED panel light brightness report

Illumination comparison of LED panel lights after installation

LED Panel light Application
share it!

Web : www.prodigital.com.tw
Taiwantrade : http://prodigital.en.taiwantrade.com/


Previous Back to List Next