Hot News
Application articles / Other
500W Mercury Lamp, Replacement 80W LED Patio Light High Patio Light (for 5 ~ 12 meters high)4
http://www.prodigital.com.tw/en/ Prodigital Technology Corp.
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C.
This time we introduce the performance of fully-filled LED soft strip lights. The original LED step lights used sleeved LED soft strip lights and LED glue strip lights. These two models are known in the industry as having an IP65 rating, but this approach is not recommended for use in outdoor engineering cases or LED landscape cases. Difference description: A.LED sleeve soft strip lights are actually composed of bare board + silicone sleeve, achieving dustproof and waterproof. 1. When the LED is hit by a frontal impact, the silicone sleeve is soft and does not protect the internal LED. 2. The inlet end of the casing must be properly protected to avoid water intrusion due to pulling and rupture after construction. 3. When the waterproofing of the on-site wiring is poor, water or moisture will penetrate the copper wire's cooling and heating effects, causing siphonage and water intrusion. B. LED glue strip lights are covered with a layer of PU glue on the exposed LED board to achieve dustproof and waterproof on the front. 1. The main disadvantage of the LED flexible strip light is that the back is not waterproof Outdoor lighting mainly depends on the quality of the product itself + the quality of on-site construction to extend its service life. Factory customization Recommended length: DC24V length 20 meters double-ended power supply, DC12V length 10 meters double-ended power supply Color temperature range: 2700K ~ 6500K Power range: 5W ~15W/meter, single row Waterproof level: IP68 Outlet method: 2 wire length < 10 meters Leave a waterproof layer on the front and back of the PCBA LED soft board, and tightly cover the LED and soft board. The wires are also wrapped in adhesive material, and the outer layer has a heat-shrinkable sleeve to enhance waterproofing and reduce the pulling force that may cause the adhesive material to break. After learning about the product, go to the construction site to see actual performance. Removing glue from lamp power wiring hole cover Clear the original LED glue strip lights and LED tube soft strip lights operations, Site bonding requires silicone to reinforce waterproofing Use a scraper to remove it and it will almost become crispy! Removing old silicone takes a lot of time!! Take out the arrangement position of LED soft strip lights Peel off the 3M adhesive on the back and press along the edges to fix it! After pressing, apply glue to the power hole. The 3M adhesive tape is only for temporary fixation. In actuality, the upper and lower edges of the LED flexible strip lights and the joints with the wall must be firmly covered with a layer of glue to prevent them from falling off. Fixed completed appearance Actual effect at night   LED soft strip light products https://www.prodigital.com.tw/en/product_cg257608.html Introduction to various types of LED soft strip lights  https://www.prodigital.com.tw/en/hot_362663.html http://www.prodigital.com.tw/en/hot_471661.html Taiwan Hsinchu Community Landscape LED Step Light LED Outdoor Full Glue-filled Soft Strip Light Construction Case 2024-03-01 2025-03-01
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. http://www.prodigital.com.tw/en/hot_471661.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. http://www.prodigital.com.tw/en/hot_471661.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-01 http://schema.org/InStock TWD 0 http://www.prodigital.com.tw/en/hot_471661.html

Share LED high patio lights to replace 500W mercury lamps, take photos of the venue and measure data.

Center illumination - about 100lux 3000K

Mercury Lamp 500W

【Venue】500W mercury lamp effect.

It is 26 meters long, 9.5 meters wide and 7 meters high, and the lamps are separated by 5 meters.

[The problem with mercury lamps]

①The time to turn on the light is about 3~5 minutes, and it takes 5~10 minutes to restart after turning off the light.

②The probability of bulb damage is low, but the light decay rate is very fast.

③It is easy to disassemble and assemble, but it needs to work at an altitude of 7 meters.

④ 500 watt mercury lamps are cheap, and the electricity bill is higher for a long time.

【Suggestions and discussions】

It is recommended to use 80 watt LED high patio lights to replace the current 500 watt mercury lamps.

After discussion, the customer was afraid that it would be too dark, and hoped to use a 120-watt LED high patio light.

In order to let customers understand the purpose of the proposal, a 120 watt LED high patio light is provided for verification.

After two days, the customer responded that the operator felt uncomfortable because it was too bright.

After the illuminometer measurement, the central illuminance of the 120-watt LED high patio light is 500Lux,

The ceiling is clearly reflective, in fact, the client understands the reason for the suggestion.

LED High Bay Light 80W testing

120 watt LED high patio light effect.

120W LED High Patio Light is recommended for occasions up to 10 meters high!

LED High Bay Light Application

80W LED High Patio Light Single & 500W Mercury Lamp Single Effect Comparison.

LED High bay light Illuminance Measurement


LED High Bay Light Installation

[Simulation comparison] The center illumination of a single lamp is about 200LuxLED High Bay Light testing

After three days of verification, the customer is satisfied with the purchase of three 80W LED high patio lights.LED High Bay Light Application

80W LED patio light effect, the scene light is evenly distributed between the ceiling and the floor.

LED High bay light Illuminance simulation

LED High bay light Illuminance simulation

LED High bay light Illuminance simulation

Specifications: PD-HB 80W LED Patio Light

Previous Back to List Next