Home
1
Hot News
2
Application articles / Other
3
Taiwan Taichung Fengyuan District Factory Replacement LED High bay Light / 400W Traditional Mercury Light Replacement / LED 240W High Patio Light / Warranty Three Years / High Efficiency Japanese LED4
http://www.prodigital.com.tw/en/ Prodigital Technology Corp.
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C.
This time we introduce the performance of fully-filled LED soft strip lights. The original LED step lights used sleeved LED soft strip lights and LED glue strip lights. These two models are known in the industry as having an IP65 rating, but this approach is not recommended for use in outdoor engineering cases or LED landscape cases. Difference description: A.LED sleeve soft strip lights are actually composed of bare board + silicone sleeve, achieving dustproof and waterproof. 1. When the LED is hit by a frontal impact, the silicone sleeve is soft and does not protect the internal LED. 2. The inlet end of the casing must be properly protected to avoid water intrusion due to pulling and rupture after construction. 3. When the waterproofing of the on-site wiring is poor, water or moisture will penetrate the copper wire's cooling and heating effects, causing siphonage and water intrusion. B. LED glue strip lights are covered with a layer of PU glue on the exposed LED board to achieve dustproof and waterproof on the front. 1. The main disadvantage of the LED flexible strip light is that the back is not waterproof Outdoor lighting mainly depends on the quality of the product itself + the quality of on-site construction to extend its service life. Factory customization Recommended length: DC24V length 20 meters double-ended power supply, DC12V length 10 meters double-ended power supply Color temperature range: 2700K ~ 6500K Power range: 5W ~15W/meter, single row Waterproof level: IP68 Outlet method: 2 wire length < 10 meters Leave a waterproof layer on the front and back of the PCBA LED soft board, and tightly cover the LED and soft board. The wires are also wrapped in adhesive material, and the outer layer has a heat-shrinkable sleeve to enhance waterproofing and reduce the pulling force that may cause the adhesive material to break. After learning about the product, go to the construction site to see actual performance. Removing glue from lamp power wiring hole cover Clear the original LED glue strip lights and LED tube soft strip lights operations, Site bonding requires silicone to reinforce waterproofing Use a scraper to remove it and it will almost become crispy! Removing old silicone takes a lot of time!! Take out the arrangement position of LED soft strip lights Peel off the 3M adhesive on the back and press along the edges to fix it! After pressing, apply glue to the power hole. The 3M adhesive tape is only for temporary fixation. In actuality, the upper and lower edges of the LED flexible strip lights and the joints with the wall must be firmly covered with a layer of glue to prevent them from falling off. Fixed completed appearance Actual effect at night   LED soft strip light products https://www.prodigital.com.tw/en/product_cg257608.html Introduction to various types of LED soft strip lights  https://www.prodigital.com.tw/en/hot_362663.html http://www.prodigital.com.tw/en/hot_471661.html Taiwan Hsinchu Community Landscape LED Step Light LED Outdoor Full Glue-filled Soft Strip Light Construction Case 2024-03-01 2025-03-01
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. http://www.prodigital.com.tw/en/hot_471661.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. http://www.prodigital.com.tw/en/hot_471661.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-03-01 http://schema.org/InStock TWD 0 http://www.prodigital.com.tw/en/hot_471661.html

The factory with a height of 10 meters is recommended. The recommended solution is 150W ~ 240W LED high Bay light.

LED High Bay Light Installation

A total of 29pcs 400W mercury bulb before replacement.

The reason for the customer's reaction: the use time is very long, the degree of light decay is unacceptable.

LED High bay light Illuminance Measurement

When the traditional 400W lamps are all turned on, the ground illumination value is about 110Lux.

LED Illuminance Measurement

The actual analog comparison is recommended to use 240W LED patio lights.

The 120W LED high-bay lamp has a simulated illumination of about 200Lux in the designated area. It is brighter than the 400W mercury lamp. It is suitable for storage.

LED Illuminance Measurement

The 240W LED high-bay lamp has an analog illumination of about 300Lux in the designated area, which is suitable for general processing.

Mercury Lamp 400W

Old 400W mercury bulb with transformer

LED High Bay Light 240W install

240WLED high Bay light (separator and lamp head separated)

240W LED high Bay light on the left, traditional 400W mercury lamp on the right.

LED High Bay Light 240W install

LED High Bay Light 240W install

Two crab carts were dispatched to speed up the installation, and the circuit was added according to customer requirements.

LED High Bay Light 240W install

After the installation is completed, the lamps and packaging materials are collected in one place.LED High Bay Light 240W install

It’s already dark, ready for illuminance testing.

LED High bay light Illuminance Measurement

When the 240W LED High Bay lamps are all turned on, the ground illumination value is about 300Lux.

LED High Bay Light 240W install

We have completed the customer's request again, Prodigital Technology makes LED use longer.

Previous Back to List Next