Hot News
Application articles / Other
Taiwan CNC Factory Replacement LED High bay Light / 400W Traditional Mercury Light Replacement / LED120W High Patio Light / Warranty Three Years / High Efficiency Japanese LED4
http://www.prodigital.com.tw/en/ Prodigital Technology Corp.
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C.
This time we introduce the performance of fully-filled LED soft strip lights. The original LED step lights used sleeved LED soft strip lights and LED glue strip lights. These two models are known in the industry as having an IP65 rating, but this approach is not recommended for use in outdoor engineering cases or LED landscape cases. Difference description: A.LED sleeve soft strip lights are actually composed of bare board + silicone sleeve, achieving dustproof and waterproof. 1. When the LED is hit by a frontal impact, the silicone sleeve is soft and does not protect the internal LED. 2. The inlet end of the casing must be properly protected to avoid water intrusion due to pulling and rupture after construction. 3. When the waterproofing of the on-site wiring is poor, water or moisture will penetrate the copper wire's cooling and heating effects, causing siphonage and water intrusion. B. LED glue strip lights are covered with a layer of PU glue on the exposed LED board to achieve dustproof and waterproof on the front. 1. The main disadvantage of the LED flexible strip light is that the back is not waterproof Outdoor lighting mainly depends on the quality of the product itself + the quality of on-site construction to extend its service life. Factory customization Recommended length: DC24V length 20 meters double-ended power supply, DC12V length 10 meters double-ended power supply Color temperature range: 2700K ~ 6500K Power range: 5W ~15W/meter, single row Waterproof level: IP68 Outlet method: 2 wire length < 10 meters Leave a waterproof layer on the front and back of the PCBA LED soft board, and tightly cover the LED and soft board. The wires are also wrapped in adhesive material, and the outer layer has a heat-shrinkable sleeve to enhance waterproofing and reduce the pulling force that may cause the adhesive material to break. After learning about the product, go to the construction site to see actual performance. Removing glue from lamp power wiring hole cover Clear the original LED glue strip lights and LED tube soft strip lights operations, Site bonding requires silicone to reinforce waterproofing Use a scraper to remove it and it will almost become crispy! Removing old silicone takes a lot of time!! Take out the arrangement position of LED soft strip lights Peel off the 3M adhesive on the back and press along the edges to fix it! After pressing, apply glue to the power hole. The 3M adhesive tape is only for temporary fixation. In actuality, the upper and lower edges of the LED flexible strip lights and the joints with the wall must be firmly covered with a layer of glue to prevent them from falling off. Fixed completed appearance Actual effect at night   LED soft strip light products https://www.prodigital.com.tw/en/product_cg257608.html Introduction to various types of LED soft strip lights  https://www.prodigital.com.tw/en/hot_362663.html http://www.prodigital.com.tw/en/hot_471661.html Taiwan Hsinchu Community Landscape LED Step Light LED Outdoor Full Glue-filled Soft Strip Light Construction Case 2024-02-26 2025-02-26
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. http://www.prodigital.com.tw/en/hot_471661.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. http://www.prodigital.com.tw/en/hot_471661.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-02-26 http://schema.org/InStock TWD 0 http://www.prodigital.com.tw/en/hot_471661.html

The most recommended product~LED High Bay light

CNC Factory Lighting

The height is limited to 5 meters, and it is recommended to install a short-axis E40 LED High Bay light~

Let the lamps close to the ceiling to avoid narrowing the illumination range~

Too many factories want to install lights and worry about the price.

It is recommended to first understand whether LED can improve the status quo

LED high bay light selection: press me!!

The customer provides the most discussion basis for the plane, which helps to discuss the installation position of the lamp.

CNC Factory Lighting

Provide simulated data reference:

LED Illumination Simulation

LED Illumination Simulation

The illumination range is between 300Lux ~ 450Lux, when no equipment is parked.

Since customers have different ideas about brightness, they specially borrowed a lamp for comparison. The photos of the two lamps tested are as follows:

Customer lamp test

LED High Bay Light testing

Prodigital Taiwan LED High Bay light test 120W E40

 LED High Bay Light testing

Due to customer testing, we are unable to obtain customer lamp specifications,

The final customer test is completed and the order is purchased 4pcs.

By the way, test the illuminance for customers' reference during sample recovery

LED High Bay Light testing

LED Illuminance Measurement

LED Illuminance Measurement

The company adopts order-based production, and customers need to accept a 4-6 week production cycle.

This ensures that you will get the latest power supply and SMD LED chips this year.

Attach the photo of the customer's final installation and the on-site illumination

LED High Bay Light case

LED Illuminance Measurement

The office also purchases OSRAM LED series of panel lights to install

LED Panel light Application


The High Bay light uses the Japanese NICHIA LED chip.

MEAN WELL power supply 7-year series.

Welcome to ask~

Previous Back to List Next