Home
1
Hot News
2
Application articles / Other
3
Taiwan villa LED full-color lighting installation LED modeling indirect lighting installation LED flexible light bar LED full-color flexible light bar4
https://www.prodigital.com.tw/en/ Prodigital Technology Corp.
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C.
This time we introduce the performance of fully-filled LED soft strip lights. The original LED step lights used sleeved LED soft strip lights and LED glue strip lights. These two models are known in the industry as having an IP65 rating, but this approach is not recommended for use in outdoor engineering cases or LED landscape cases. Difference description: A.LED sleeve soft strip lights are actually composed of bare board + silicone sleeve, achieving dustproof and waterproof. 1. When the LED is hit by a frontal impact, the silicone sleeve is soft and does not protect the internal LED. 2. The inlet end of the casing must be properly protected to avoid water intrusion due to pulling and rupture after construction. 3. When the waterproofing of the on-site wiring is poor, water or moisture will penetrate the copper wire's cooling and heating effects, causing siphonage and water intrusion. B. LED glue strip lights are covered with a layer of PU glue on the exposed LED board to achieve dustproof and waterproof on the front. 1. The main disadvantage of the LED flexible strip light is that the back is not waterproof Outdoor lighting mainly depends on the quality of the product itself + the quality of on-site construction to extend its service life. Factory customization Recommended length: DC24V length 20 meters double-ended power supply, DC12V length 10 meters double-ended power supply Color temperature range: 2700K ~ 6500K Power range: 5W ~15W/meter, single row Waterproof level: IP68 Outlet method: 2 wire length < 10 meters Leave a waterproof layer on the front and back of the PCBA LED soft board, and tightly cover the LED and soft board. The wires are also wrapped in adhesive material, and the outer layer has a heat-shrinkable sleeve to enhance waterproofing and reduce the pulling force that may cause the adhesive material to break. After learning about the product, go to the construction site to see actual performance. Removing glue from lamp power wiring hole cover Clear the original LED glue strip lights and LED tube soft strip lights operations, Site bonding requires silicone to reinforce waterproofing Use a scraper to remove it and it will almost become crispy! Removing old silicone takes a lot of time!! Take out the arrangement position of LED soft strip lights Peel off the 3M adhesive on the back and press along the edges to fix it! After pressing, apply glue to the power hole. The 3M adhesive tape is only for temporary fixation. In actuality, the upper and lower edges of the LED flexible strip lights and the joints with the wall must be firmly covered with a layer of glue to prevent them from falling off. Fixed completed appearance Actual effect at night   LED soft strip light products https://www.prodigital.com.tw/en/product_cg257608.html Introduction to various types of LED soft strip lights  https://www.prodigital.com.tw/en/hot_362663.html https://www.prodigital.com.tw/en/hot_471661.html Taiwan Hsinchu Community Landscape LED Step Light LED Outdoor Full Glue-filled Soft Strip Light Construction Case 2024-04-19 2025-04-19
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/en/hot_471661.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/en/hot_471661.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-04-19 http://schema.org/InStock TWD 0 https://www.prodigital.com.tw/en/hot_471661.html

This time introduces the indirect light source of luxury woodworking decoration

LED light source indirectly recommends 10W 3000K flexible strip light (referred to as warm light, warm white light)

The LED light source modeling lamp recommends a 14-watt full-color flexible strip light.

First look at the finished carpentry decoration picture, the living room 14-watt full-color flexible strip lights set off the 3D ceiling shape

ceiling strip light

The stairwell is decorated with 10 watt flexible strip lights and stone.

Stair indirect light strip light

 Stair indirect light strip light

Stair indirect light strip light

Leisurely soft light in the dining roomShaped ceiling strip light

 

Thanks to the host for supporting us, so that we can match with the carpenter's decoration to create such a comfortable home environment.

---------------------------------------------------------------------

It is so simple at the beginning. 2 2D drawings, the size of the repair hole and the size of the power supply need to be reserved

And concentrate on the designated location, all cooperate with the woodworker to embed the thread.

strip light installation plan

 strip light installation plan

After one and a half months, I finally got a look

Prototype of living room ceiling

ceiling frame

Prototype of dining room ceiling

ceiling frame

ceiling frame

Ask the woodworker to confirm the size and provide the wire to be buried in the designated location.

ceiling frame

ceiling frame

 ceiling frame

Discussion on the position and size of the indirect light source in the dining room

ceiling frame

玄關一開始的雛形

ceiling frame

The first prototype of the stairwell

ceiling frame

All prototypes need dimensions to order and calculate the corresponding power supply.

Especially indirect light like stairs needs to use a source that can pass through the embedded box

ceiling frame

The lamps are all powered by DC, which makes the life of the LED longer,

The above-mentioned carpenter's project progress is about 2 months, and the LED customized production takes 4 to 6 weeks, which is enough time to cope with the project progress.

You only need to confirm the position of the wire in the middle, and you can wait until the final construction.

strip light installation project

strip light installation project

Finally the lamps and power supply + full-color control host are here

strip light installation project

3000K 10W

3014 10W  DC24V strip ligjht

For full-color lamps, please see the following video introduction

RGB14.4W

3000K DC 24V LED Strip lgiht

After the carpenter's master has done a simple cleaning of the site for about 4 months, we will enter the site.

Porch

strip light installation project

The most difficult restaurant installation

strip light installation project

strip light installation project

strip light installation project

Hall Room

strip light installation project

strip light installation project

客廳全彩LED軟條燈

strip light installation project

Organize the loop test and wrap it with electrical tape after the test

strip light installation project

strip light installation project

step by step

strip light installation project

Configure invincible large power supply

MW Power

The installation is complete and can be officially tested2.4G LED contriller

strip light installation project

strip light installation project

strip light installation project

strip light installation project

strip light installation project

strip light installation project

Finally finished! Congratulations!

Note: The above power supplies are all selected with a warranty of 5 years and retain 20% of the power. The life of the power supply will be extended!

 

Product related links
https://www.prodigital.com.tw/en/product_cg257608.html
Product catalog reference
https://www.prodigital.com.tw/en/custom_85695.html

恒新數位科技粉絲團

恒新數位企業辨識

Previous Back to List Next