Home
1
Hot News
2
Application articles / Other
3
100W & 150W Patio Light Installation Planning Results in Longtan District, Taoyuan City, Taiwan LED Patio Light LED Patio Light Installation UFO Patio Light Warranty Three Year Patio Light High Efficiency LED Patio Light4
http://www.prodigital.com.tw/en/ Prodigital Technology Corp.
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C.
This time we introduce the performance of fully-filled LED soft strip lights. The original LED step lights used sleeved LED soft strip lights and LED glue strip lights. These two models are known in the industry as having an IP65 rating, but this approach is not recommended for use in outdoor engineering cases or LED landscape cases. Difference description: A.LED sleeve soft strip lights are actually composed of bare board + silicone sleeve, achieving dustproof and waterproof. 1. When the LED is hit by a frontal impact, the silicone sleeve is soft and does not protect the internal LED. 2. The inlet end of the casing must be properly protected to avoid water intrusion due to pulling and rupture after construction. 3. When the waterproofing of the on-site wiring is poor, water or moisture will penetrate the copper wire's cooling and heating effects, causing siphonage and water intrusion. B. LED glue strip lights are covered with a layer of PU glue on the exposed LED board to achieve dustproof and waterproof on the front. 1. The main disadvantage of the LED flexible strip light is that the back is not waterproof Outdoor lighting mainly depends on the quality of the product itself + the quality of on-site construction to extend its service life. Factory customization Recommended length: DC24V length 20 meters double-ended power supply, DC12V length 10 meters double-ended power supply Color temperature range: 2700K ~ 6500K Power range: 5W ~15W/meter, single row Waterproof level: IP68 Outlet method: 2 wire length < 10 meters Leave a waterproof layer on the front and back of the PCBA LED soft board, and tightly cover the LED and soft board. The wires are also wrapped in adhesive material, and the outer layer has a heat-shrinkable sleeve to enhance waterproofing and reduce the pulling force that may cause the adhesive material to break. After learning about the product, go to the construction site to see actual performance. Removing glue from lamp power wiring hole cover Clear the original LED glue strip lights and LED tube soft strip lights operations, Site bonding requires silicone to reinforce waterproofing Use a scraper to remove it and it will almost become crispy! Removing old silicone takes a lot of time!! Take out the arrangement position of LED soft strip lights Peel off the 3M adhesive on the back and press along the edges to fix it! After pressing, apply glue to the power hole. The 3M adhesive tape is only for temporary fixation. In actuality, the upper and lower edges of the LED flexible strip lights and the joints with the wall must be firmly covered with a layer of glue to prevent them from falling off. Fixed completed appearance Actual effect at night   LED soft strip light products https://www.prodigital.com.tw/en/product_cg257608.html Introduction to various types of LED soft strip lights  https://www.prodigital.com.tw/en/hot_362663.html http://www.prodigital.com.tw/en/hot_471661.html Taiwan Hsinchu Community Landscape LED Step Light LED Outdoor Full Glue-filled Soft Strip Light Construction Case 2024-02-26 2025-02-26
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. http://www.prodigital.com.tw/en/hot_471661.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. http://www.prodigital.com.tw/en/hot_471661.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-02-26 http://schema.org/InStock TWD 0 http://www.prodigital.com.tw/en/hot_471661.html

This time, we will introduce the performance of 6~7m LED patio lights in Longtan District, Taoyuan, Taiwan.

LED High Patio Light Installation Photos

The customer informed that the 250-watt mercury lamp is obviously insufficient for lighting, the damage rate is high, and it is not easy to buy it in the physical channel.

LED Illumination Simulation

According to the size and height, use software to compare the most suitable lamps to avoid blind installation!!

Note: The analog comparison needs to apply 100W and 150W to replace various light-emitting angles.

Mercury Lamp 300W

Traditional 300W mercury lamp

Mercury Lamp 250W

The lamp reflector is old and micro-atomizedMercury Lamp

The appearance of lamps has traces of history

LED High Bay Light Installation Photos

Install new lamps

LED High bay Light Installation Photos

Concentrate old lamps

LED Illumination Simulation

Simulation and Illumination Check

LED Illuminance Measurement

Central area

LED Illuminance Measurement

around the venue

-----------------------------------------------------------------------------------------

Description of the evaluation process:

1. Need site size height length x width

2. Installation difficulty, do you need an aerial work vehicle...etc

3. Lamp specifications 100W 150W 200W within 4 meters ~ 10 meters

4. Other needs

恒新數位科技臉書

 

 

Previous Back to List Next