Hot News
Application articles / Other
Taiwan installation performance LED full-color lamp installation LED shape indirect light lamp installation LED flexible strip light LED full-color flexible strip light4
https://www.prodigital.com.tw/en/ Prodigital Technology Corp.
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C.
This time we introduce the performance of fully-filled LED soft strip lights. The original LED step lights used sleeved LED soft strip lights and LED glue strip lights. These two models are known in the industry as having an IP65 rating, but this approach is not recommended for use in outdoor engineering cases or LED landscape cases. Difference description: A.LED sleeve soft strip lights are actually composed of bare board + silicone sleeve, achieving dustproof and waterproof. 1. When the LED is hit by a frontal impact, the silicone sleeve is soft and does not protect the internal LED. 2. The inlet end of the casing must be properly protected to avoid water intrusion due to pulling and rupture after construction. 3. When the waterproofing of the on-site wiring is poor, water or moisture will penetrate the copper wire's cooling and heating effects, causing siphonage and water intrusion. B. LED glue strip lights are covered with a layer of PU glue on the exposed LED board to achieve dustproof and waterproof on the front. 1. The main disadvantage of the LED flexible strip light is that the back is not waterproof Outdoor lighting mainly depends on the quality of the product itself + the quality of on-site construction to extend its service life. Factory customization Recommended length: DC24V length 20 meters double-ended power supply, DC12V length 10 meters double-ended power supply Color temperature range: 2700K ~ 6500K Power range: 5W ~15W/meter, single row Waterproof level: IP68 Outlet method: 2 wire length < 10 meters Leave a waterproof layer on the front and back of the PCBA LED soft board, and tightly cover the LED and soft board. The wires are also wrapped in adhesive material, and the outer layer has a heat-shrinkable sleeve to enhance waterproofing and reduce the pulling force that may cause the adhesive material to break. After learning about the product, go to the construction site to see actual performance. Removing glue from lamp power wiring hole cover Clear the original LED glue strip lights and LED tube soft strip lights operations, Site bonding requires silicone to reinforce waterproofing Use a scraper to remove it and it will almost become crispy! Removing old silicone takes a lot of time!! Take out the arrangement position of LED soft strip lights Peel off the 3M adhesive on the back and press along the edges to fix it! After pressing, apply glue to the power hole. The 3M adhesive tape is only for temporary fixation. In actuality, the upper and lower edges of the LED flexible strip lights and the joints with the wall must be firmly covered with a layer of glue to prevent them from falling off. Fixed completed appearance Actual effect at night   LED soft strip light products https://www.prodigital.com.tw/en/product_cg257608.html Introduction to various types of LED soft strip lights  https://www.prodigital.com.tw/en/hot_362663.html https://www.prodigital.com.tw/en/hot_471661.html Taiwan Hsinchu Community Landscape LED Step Light LED Outdoor Full Glue-filled Soft Strip Light Construction Case 2024-06-14 2025-06-14
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/en/hot_471661.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/en/hot_471661.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-06-14 http://schema.org/InStock TWD 0 https://www.prodigital.com.tw/en/hot_471661.html

This article introduces indirect light sources for luxury carpentry decoration

LED light source indirectly recommends 10-watt 3000K soft strip light (referred to as warm light, warm white light)
LED light source modeling lights recommend 14-watt full-color soft strip lights.
First look at the finished carpentry decoration picture, the 14-watt full-color soft strip light in the living room sets off the 3D ceiling shape


The stairwell is decorated with 10-watt soft strip lights and stone.




Dining room with relaxing and soft light



Thank you to the owner for supporting us and allowing us to work with the carpenter to create such a comfortable home environment.


It's so simple to start with 2 2D drawings, you need to reserve the size of the maintenance hole and the size of the power supply

And focus on the designated position, all with carpentry embedding.



After 1 and a half months, I finally got the look

Living room ceiling prototype


Dining Room Ceiling Prototype



Ask the carpenter to confirm the dimensions and provide wires to bury in the designated locations.IMG_9382



Discussion on the location and size of indirect light sources in the dining roomIMG_9402

The first prototype of the entrance hallIMG_9387

The initial prototype of the stairwellIMG_9390

The full prototype requires dimensions to be customized and the corresponding power supply calculated.

Especially indirect light like stairs needs to use a source that can just pass through the embedded box.


All lamps are powered by DC, which makes the LEDs last longer.

The above carpentry master's project progress is about 2 months, and LED customized production requires 4 to 6 weeks, which is enough time to cope with the project progress.

You only need to confirm the position of the wires during the process and then start the construction at the end.



Finally, the lamps and power supply + full-color control host are here


3000K 10W


Full-color lighting video introduction



After the carpenter did some simple cleaning on site for about 4 months, we came in



The most difficult dining room installation




Hall roomIMG_0878


Living room full color LED soft strip lightIMG_0778

Organize the circuit test and wrap it with electrical tape after the test is completed.IMG_0786


step by stepIMG_0822

Configure an invincible Big power supplyIMG_0931

Once the installation is complete, you can formally test it.IMG_0891-1







Finally done! Congratulations!

Note: The above power supplies are all selected with a 5-year warranty and retain 20% of the power, and the life of the power supply will be extended!


Product Related Links
Product catalog reference



Previous Back to List Next