Home
1
Hot News
2
Application articles / Other
3
500W Mercury Lamp, Replacement 80W LED Patio Light High Patio Light (for 5 ~ 12 meters high)4
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C.
Introduction of various types of LED flexible strip lights:1.What is flexible strip light:The SMD LED is directly printed on a 100 cm PCB soft board, and each piece of 100 cm is soldered to a length of 500 cm. The body is flexible within a certain specification, and can be cut to the required length according to the mark, called a flexible strip light.Figure 1: Schematic diagram of the length of the flexible stripFigure 2: Schematic diagram of flexible strip light packaging2.LED types often used for flexible strip lights: Monochrome standard: SMD 3014 / SMD 2835 / SMD 3030 / SMD 5630 / SMD 5050 Two-color standard: SMD 3014 / SMD 2835 / MD 3030l Full color standard: SMD / 3014 / SMD 2835 / SMD 5050l Special LED: SMD 5050 IC LED, LED with IC current limiting version, LED with IC control versionNote 1: The descriptions not listed above are all customized LEDs. 3.Selection of voltage for flexible strip lights:DC DC5V, need to purchase additional power supplyDC DC12V, need to purchase additional power supplyDC DC24V, an additional power supply is requiredAC 110V, with bridge rectifier attached to the front endAC 220V, with a bridge rectifier attached to the front endNote: The DC flexible strip lights are for DC use, and there is no doubt about electric shock.4.Appearance of flexible strip light production types:Bare layout: PCB background color is white or black, the LED light spot can be seen by naked eyes after lightingSilicone sleeve type A: Milky white, no LED light spots can be seen after lightingSilicone sleeve type B: transparent, the LED light spot can be seen by the naked eye after lightingPU glue type: milky white / transparent, the LED light spot can be seen by the naked eye after lightingPU glue type: milky white / transparent, the LED light spot can be seen by the naked eye after lightingPU colloid type: milky white, no LED light spots after lighting5.The luminous form of the flexible strip light:Front light: for sideline or straight line installation:After lighting, the naked eye can directly see the LED light spot, which is often used in general lighting/camping lights/contour lights/guide lights/indicators...The indirect light source that draws light out through space or guidance is often used in advertising word boxes/art lamps/decorative indirect light sources/closet lights/shoe cabinet lights...Side light: Mainly used for curved surface or modeling installation, such as fonts/car lights/decoration/landscape lights...3 side light / 3D light bar:Mainly installed in round or square shape, often used for indicator lights/bar table lights/box frame lights...6.The type of flexible strip light using protection production:Bare board type: LED and PCB soft board without any protection, can directly contact the mold, usually DC use, often used in interior decoration or special artistic modeling lights. (Dustproof and waterproof grade IP20 or IP30)Figure 3: Bare board Silicone sleeve type A: A specific type of sleeve is injected through the silicone material, and then the LED is placed in this sleeve, which is generally used to replace the neon tube. (Dustproof and waterproof grade IP54 / IP65 / IP66 / IP67)Figure 4: The left picture with silicone sleeve type A, the right picture with silicone sleeve type BPU dripping type: Use dispensing equipment, dripping method, cover the surface of LED and PCB with a layer of protective colloid, this model can reach IP65 moisture and waterproof, suitable for installation in eaves or shelters. (Dustproof and waterproof grade IP65)Figure 5: Drop glue typePU glue type: LED and PCB soft board are integrally wrapped in PU glue, so that the flexible strip light can be directly used in outdoor or low-temperature environments, such as underwater 3 meters / freezer light. (Dustproof and waterproof grade IP68)Figure 6: Glue filling type PU colloid type: Put the LED and PCB soft board into a customized container filled with PU colloid, which has excellent light conductivity and weather resistance. This is an upgraded version of the sleeve type, which improves the waterproof and brightness problems, and the appearance is smooth and smooth. Not easy to be contaminated with dust, (dustproof and waterproof grade IP68)Figure 7: PU colloid7.Advantages of Hengxin Prodigital Technology Soft Strip Light:Using high-quality EPISTAR LED chip, the life is relatively stable.The appearance of special material is not easy to stain dust, acid and alkali resistance.The special material can withstand temperature shocks and can be used in an environment of -40 degrees without embrittlement of the colloid due to low temperature.It is produced with special materials, and the color temperature does not cause the color temperature error due to material factors. The customized range is 1900 ~ 7500K.There are many options for the number of LEDs, such as 30 LED / 60 LED / 72 LED / 96 LED / 144 LED / 288 LED per meter.The length can also be customized, single color 10~15 meters, full color 25~50 meters double-ended power supply, diving/swimming pool... etc.8.Application example:   Prodigital Technology provides experienced planning services and customized product selection. Welcome to call or email us!Company phone:03-5518912E-mail: da_chiu@prodigital.com.twWeb: www.prodigital.com.twLine: 0918467886 (Business/Technical Consulting)                 Catalog download        Online form                                        Full color 25 meters IP68       Full color 25 meters IP68          Indoor indirect light source 2.4G control + LED https://www.prodigital.com.tw/hot_362663.html Introduction to LED Strip Light LED flexible strip light / LED PU colloid light / LED bare board light / LED epoxy light / LED tube light 2021-07-27 2022-07-27
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_362663.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_362663.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2021-07-27 http://schema.org/InStock $NT 0 https://www.prodigital.com.tw/hot_362663.html

分享LED高天井燈取代500W水銀燈,場地拍照並量測數據.

中心照度-約100lux 3000K


【場地】500瓦水銀燈效果.

 26米長9.5米寬7米高,燈具間隔5米一盞.

 

水銀燈的問題】

①開燈時間大概3~5分鐘,關畢重新啟動需要5~10分鐘.

②燈泡損壞機率低,可是光衰的速度很快.

③拆裝容易,但需要在7米高空作業.

④500瓦水銀燈取得便宜,長時間來計算電費較高.

 

【建議與討論】

建議採用80瓦LED高天井燈,取代目前的500瓦水銀燈,

經討後客戶怕太暗,希望採用120瓦的LED高天井燈,

為了讓客戶了解建議的目的,則提供一盞120瓦LED高天井燈驗證.

 

經過兩天後客戶回應,因為太亮導致作業人員覺得不舒服,

經過照度計測量,120瓦LED高天井燈中心照度500Lux,

天花板明顯反光,事實上,客戶了解建議的原因了.


120瓦LED高天井燈效果.

建議120瓦 LED高天井燈用於10米高的場合!

80瓦LED高天井燈 單盞 & 500W瓦水銀燈 單盞效果對照.


測量單盞中心照度約220Lux 


【模擬比對】單盞中心照度約200Lux


經過三天驗證後,客戶滿意的購買三台80瓦LED高天井燈.


80瓦LED天井燈效果,現場光線均勻分佈於天花板與地板間.


【80瓦LED天井燈三盞模擬數據】

恒新數位模擬

恒新數位模擬

恒新數位模擬

規格: PD-HB 80W LED 天井燈

Previous Back to List Next