Home
1
Hot News
2
Application articles / Other 3
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C.
Introduction of various types of LED flexible strip lights:1.What is flexible strip light:The SMD LED is directly printed on a 100 cm PCB soft board, and each piece of 100 cm is soldered to a length of 500 cm. The body is flexible within a certain specification, and can be cut to the required length according to the mark, called a flexible strip light.Figure 1: Schematic diagram of the length of the flexible stripFigure 2: Schematic diagram of flexible strip light packaging2.LED types often used for flexible strip lights: Monochrome standard: SMD 3014 / SMD 2835 / SMD 3030 / SMD 5630 / SMD 5050 Two-color standard: SMD 3014 / SMD 2835 / MD 3030l Full color standard: SMD / 3014 / SMD 2835 / SMD 5050l Special LED: SMD 5050 IC LED, LED with IC current limiting version, LED with IC control versionNote 1: The descriptions not listed above are all customized LEDs. 3.Selection of voltage for flexible strip lights:DC DC5V, need to purchase additional power supplyDC DC12V, need to purchase additional power supplyDC DC24V, an additional power supply is requiredAC 110V, with bridge rectifier attached to the front endAC 220V, with a bridge rectifier attached to the front endNote: The DC flexible strip lights are for DC use, and there is no doubt about electric shock.4.Appearance of flexible strip light production types:Bare layout: PCB background color is white or black, the LED light spot can be seen by naked eyes after lightingSilicone sleeve type A: Milky white, no LED light spots can be seen after lightingSilicone sleeve type B: transparent, the LED light spot can be seen by the naked eye after lightingPU glue type: milky white / transparent, the LED light spot can be seen by the naked eye after lightingPU glue type: milky white / transparent, the LED light spot can be seen by the naked eye after lightingPU colloid type: milky white, no LED light spots after lighting5.The luminous form of the flexible strip light:Front light: for sideline or straight line installation:After lighting, the naked eye can directly see the LED light spot, which is often used in general lighting/camping lights/contour lights/guide lights/indicators...The indirect light source that draws light out through space or guidance is often used in advertising word boxes/art lamps/decorative indirect light sources/closet lights/shoe cabinet lights...Side light: Mainly used for curved surface or modeling installation, such as fonts/car lights/decoration/landscape lights...3 side light / 3D light bar:Mainly installed in round or square shape, often used for indicator lights/bar table lights/box frame lights...6.The type of flexible strip light using protection production:Bare board type: LED and PCB soft board without any protection, can directly contact the mold, usually DC use, often used in interior decoration or special artistic modeling lights. (Dustproof and waterproof grade IP20 or IP30)Figure 3: Bare board Silicone sleeve type A: A specific type of sleeve is injected through the silicone material, and then the LED is placed in this sleeve, which is generally used to replace the neon tube. (Dustproof and waterproof grade IP54 / IP65 / IP66 / IP67)Figure 4: The left picture with silicone sleeve type A, the right picture with silicone sleeve type BPU dripping type: Use dispensing equipment, dripping method, cover the surface of LED and PCB with a layer of protective colloid, this model can reach IP65 moisture and waterproof, suitable for installation in eaves or shelters. (Dustproof and waterproof grade IP65)Figure 5: Drop glue typePU glue type: LED and PCB soft board are integrally wrapped in PU glue, so that the flexible strip light can be directly used in outdoor or low-temperature environments, such as underwater 3 meters / freezer light. (Dustproof and waterproof grade IP68)Figure 6: Glue filling type PU colloid type: Put the LED and PCB soft board into a customized container filled with PU colloid, which has excellent light conductivity and weather resistance. This is an upgraded version of the sleeve type, which improves the waterproof and brightness problems, and the appearance is smooth and smooth. Not easy to be contaminated with dust, (dustproof and waterproof grade IP68)Figure 7: PU colloid7.Advantages of Hengxin Prodigital Technology Soft Strip Light:Using high-quality EPISTAR LED chip, the life is relatively stable.The appearance of special material is not easy to stain dust, acid and alkali resistance.The special material can withstand temperature shocks and can be used in an environment of -40 degrees without embrittlement of the colloid due to low temperature.It is produced with special materials, and the color temperature does not cause the color temperature error due to material factors. The customized range is 1900 ~ 7500K.There are many options for the number of LEDs, such as 30 LED / 60 LED / 72 LED / 96 LED / 144 LED / 288 LED per meter.The length can also be customized, single color 10~15 meters, full color 25~50 meters double-ended power supply, diving/swimming pool... etc.8.Application example:   Prodigital Technology provides experienced planning services and customized product selection. Welcome to call or email us!Company phone:03-5518912E-mail: da_chiu@prodigital.com.twWeb: www.prodigital.com.twLine: 0918467886 (Business/Technical Consulting)                 Catalog download        Online form                                        Full color 25 meters IP68       Full color 25 meters IP68          Indoor indirect light source 2.4G control + LED https://www.prodigital.com.tw/hot_362663.html Introduction to LED Strip Light LED flexible strip light / LED PU colloid light / LED bare board light / LED epoxy light / LED tube light 2021-07-27 2022-07-27
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_362663.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_362663.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2021-07-27 http://schema.org/InStock $NT 0 https://www.prodigital.com.tw/hot_362663.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C.
LEDT8 4-foot microwave radar sensor tube performance introductionCommunity description:1. The original lamp adopts T5 fortification lamp + mountain lamp, total 174pcs2. The car compartment is usually not open, a total of 74pcs (B2~B3)3. The lane is always on, a total of 100pcs (B2~B3)4. "Driveway" annual electricity bill is about $65,3184. (T5 traditional lamp holder)Assessment focus:1. No additional induction device is installed to avoid modifying the circuit.2. Replace the universal lamp holder to avoid the difficulty of buying a lamp in the future.3. The latest sense and new technology has fewer induction blind spots, saving electricity and taking into account safety lighting.4.Automatically provide lighting during vehicle driving and parking.5. High lumen output effectively extends the life of the lamp. Installation and construction:Hengxin Digital Technology adopts engineering-specific lamp holder packaging, and the removed lamps and lanterns can be handled properlyAvoid excessive packaging materials and create more garbage.Construction plan:1. Construction Quantity Table24 B2 compartments, 34 lanes, 58 single-layer24 B3 compartments, 34 lanes, 58 single-layer24 B4 compartments, 34 lanes, 58 single-layer174 in total2. The lamp holders of the replaced lamps are concentrated and crossed.3. Function test description: The vehicle and walking function (same specification description) are tested and accepted.Fourth, give management personnel to implement traffic management operations during the construction period to avoid danger.Fifth, the vehicle scheduling is arranged by the community, and the implementer will arrange the installation to keep the installation progress on schedule and avoid affecting the access of community personnel.LED 4 feet microwave radar sensor tube installation1. Power off installation2. Equipped with community construction identification vest3. Place the removed lamp holders together4. LED 4-foot microwave radar sensor tube illuminance measurement5. Quantity calculation and acceptance 6. LED 4-foot microwave radar sensor tube acceptance test video Product information:PushMore video:pushFor more information, please go to the official website:pushSearch online for "Prodigital Technology Corp"Welcome your inquiry https://www.prodigital.com.tw/hot_362659.html Basement parking lot in Taipei, Taiwan LED 4-foot microwave radar sensor tube (120cm) 2021-07-27 2022-07-27
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_362659.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_362659.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2021-07-27 http://schema.org/InStock $NT 0 https://www.prodigital.com.tw/hot_362659.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C.
This time introduces the full-color flexible strip light with the ceilingComplete case photoDescription:Because of the purchase of high-end audio equipment in the customer's home, he discussed the ceiling shape with the master carpenter, so we have the opportunity to take the case.When I started to take over, I couldn’t see the shape on the floor plan.The woodworker informed that it is easier to understand the on-site discussion, and explained that the wire pre-embedded for the lighting configuration should be provided first.After discussion, confirm the construction time of the lamp and confirm the size of the shape after the soil is filled and painted.The green circle represents the position of the control and power supply, and the others are LED light bars.After following the instructions of the master carpenter, we marked the dimensions on the floor plan and photos for confirmation.In addition, it is recommended that the woodworker completely exit the site and replace the full-color LED application. Avoid dust and soil filling and painting on the site.The LED strip needs to be cleaned a second time after application.Power and control pre-workPut into the tube groove to compare~During the construction, it is necessary to remove the back decoration and make up the soil, and the glue on the back of the LED is fixed and fixed to avoid changes in the color selection.The LED flexible strip light adopts a four-wire system, red/green/blue/common positive control, that is, all colors change simultaneously.Photos in progressWhen encountering a special angle, it is strictly forbidden to fold the LED in half to avoid breaking the solder joints/pins. Be sure to save 5 cm before turning.The ㄇ type solid is only suitable for the form of a tube on the surface of the LED. Do not use this ㄇ type to apply excessive force to the surface of the LED.    Change test~Indirect lamp homingFinally, wipe the dirty spots accidentally during the application with a damp cloth, and take the garbage away, and the completion is smooth.Video appreciation~Questions are welcome~ https://www.prodigital.com.tw/hot_361359.html Full color three-dimensional ceiling / full color neon light / full color PU light / full color LED strip / wireless full color LED control / color neon light / customized LED flexible strip light 2021-07-27 2022-07-27
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_361359.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_361359.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2021-07-27 http://schema.org/InStock $NT 0 https://www.prodigital.com.tw/hot_361359.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C.
The most recommended product~LED High Bay lightThe height is limited to 5 meters, and it is recommended to install a short-axis E40 LED High Bay light~Let the lamps close to the ceiling to avoid narrowing the illumination range~Too many factories want to install lights and worry about the price.It is recommended to first understand whether LED can improve the status quoLED high bay light selection: press me!!The customer provides the most discussion basis for the plane, which helps to discuss the installation position of the lamp.Provide simulated data reference:The illumination range is between 300Lux ~ 450Lux, when no equipment is parked.Since customers have different ideas about brightness, they specially borrowed a lamp for comparison. The photos of the two lamps tested are as follows:Customer lamp testProdigital Taiwan LED High Bay light test 120W E40 Due to customer testing, we are unable to obtain customer lamp specifications,The final customer test is completed and the order is purchased 4pcs.By the way, test the illuminance for customers' reference during sample recoveryThe company adopts order-based production, and customers need to accept a 4-6 week production cycle.This ensures that you will get the latest power supply and SMD LED chips this year.Attach the photo of the customer's final installation and the on-site illuminationThe office also purchases OSRAM LED series of panel lights to installThe High Bay light uses the Japanese NICHIA LED chip.MEAN WELL power supply 7-year series.Welcome to ask~ https://www.prodigital.com.tw/hot_359241.html Taiwan CNC Factory Replacement LED High bay Light / 400W Traditional Mercury Light Replacement / LED120W High Patio Light / Warranty Three Years / High Efficiency Japanese LED 2021-07-27 2022-07-27
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_359241.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_359241.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2021-07-27 http://schema.org/InStock $NT 0 https://www.prodigital.com.tw/hot_359241.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C.
The factory with a height of 10 meters is recommended. The recommended solution is 150W ~ 240W LED high Bay light.A total of 29pcs 400W mercury bulb before replacement.The reason for the customer's reaction: the use time is very long, the degree of light decay is unacceptable.When the traditional 400W lamps are all turned on, the ground illumination value is about 110Lux.The actual analog comparison is recommended to use 240W LED patio lights.The 120W LED high-bay lamp has a simulated illumination of about 200Lux in the designated area. It is brighter than the 400W mercury lamp. It is suitable for storage.The 240W LED high-bay lamp has an analog illumination of about 300Lux in the designated area, which is suitable for general processing.Old 400W mercury bulb with transformer240WLED high Bay light (separator and lamp head separated)240W LED high Bay light on the left, traditional 400W mercury lamp on the right.Two crab carts were dispatched to speed up the installation, and the circuit was added according to customer requirements.After the installation is completed, the lamps and packaging materials are collected in one place.It’s already dark, ready for illuminance testing.When the 240W LED High Bay lamps are all turned on, the ground illumination value is about 300Lux.We have completed the customer's request again, Prodigital Technology makes LED use longer. https://www.prodigital.com.tw/hot_320682.html Taiwan Taichung Fengyuan District Factory Replacement LED High bay Light / 400W Traditional Mercury Light Replacement / LED 240W High Patio Light / Warranty Three Years / High Efficiency Japanese LED 2021-07-27 2022-07-27
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_320682.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_320682.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2021-07-27 http://schema.org/InStock $NT 0 https://www.prodigital.com.tw/hot_320682.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C.
This time introduces the replacement of LED 120W high ceiling light in Xinzhuang District Iron and Steel Factory (Taiwan) The space is 15x45x9 meters, the number of installed lamps is 14盏, and the customer responds with 400W mercury lamps. Since the installation is used, the light source is easy to be broken (the stabilizer has been installed), and the mercury lamp has been switched on for a long time. Light fading illumination is no longer acceptable. The illuminance value of the installed luminaire is confirmed by simulation. The estimated illuminance of this steel heavy oil zone will be greater than 300 Lux. Actual measured value before installation Panoramic shooting comparison The LED itself already has a good power supply. This regulator must be dismantled for the LED to create additional power losses. Replacing the LED luminaire, the E40 connector is directly installed. And install a fall arrester to prevent the crane from moving for a long time and causing it to fall. Note: The same is true for locks or hangs. This is a very important part!!   Installed photo This photo is compared with the pre-installation, the floor is not dim. According to the measurement, there are 200lux in the corner area to meet the customer's needs. Mercury bulb close-up removed. The above photos are forbidden to be reproduced in any form! https://www.prodigital.com.tw/hot_314934.html Taiwan 400W for 120W high patio lights / 3 times lower power consumption / 3 times brightness enhancement / three years warranty / heavy oil area lamps / 130lm/W / 15,600lm 2021-07-27 2022-07-27
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_314934.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_314934.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2021-07-27 http://schema.org/InStock $NT 0 https://www.prodigital.com.tw/hot_314934.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C.
Use LED high-bay lights to plan foreign CNC factories! ​ Time to review purchases from European countries in February 2018. After professionally inquiring about customer needs, of course, you need to ask the key points, in order to know the needs of the simulation at the right time. (This point is very important) Buying things abroad, in addition to shopping, you need to know where the factory's profession is. for example: 1. Is the specification clear (you can see the specifications after reading this article)2. Does the use of materials stabilize the product?3. Is it suitable for the place of purchase?4. Is it easy to install and maintain?5. Is it easy to transport? Based on the above points, customers need to use our professional planning and suggestions for products, and let customers know at the right time. We don't just sell lamps to customers, we also need to let customers know that we don't just use a light in the simulation. Return to the theme: At the beginning, the customer only proposed which kind of lamp to replace with 7 meters high. (At this time, the inner OS... can replace the solution too diversified) After a serious conversation, you need to know the needs of the place and the illumination, otherwise the specifications and prices can only know the budget. It is not very friendly to the end user. Finally, the customer provides more detailed information, as follows ​ The space is equipped with new lighting for the new plant area, which is 66 meters wide, 18 meters high and 7 meters high. Need to reach 200Lux in the green area, to avoid the brightness is too low. (85cm high) After converting the analog data, it is recommended to use 120W LED high-bay lights (Zhongguangjiao) In addition to the simulation of 80 watts / medium angle, 100 watts / medium wide angle, 150W / wide angle for comparison, The number of turns can be from 72盏 to 36最后 at the end. Only filter the brightness of the luminaire, can't understand the actual demand, and finally buy it according to the budget. Finally, the people on the scene are patient. Multiple comparison methods can save a lot of trouble and future maintenance costs. The light is not broken, it is not dark, it is equal to broken, how is this trap always in the middle. (If you have used a traditional E40 75W large spiral bulb or an E40 LED large bulb, Even used LED patio lights, floodlights still feel not OK, please seriously consider the following questions!) The simulation is to let the terminal know the following questions: 1. Is the illumination sufficient (how much?)2. Is the dark area too obvious (how to tell?)3. Installation location and power configuration in advance planning (power saving or more power consumption?)4. Can the old and new lights be adapted? (Used is very disappointing, not used, afraid?)5. Is the illumination as expected? (What kind of lamp was it?)After the simulation and professional advice, the final state of the simulation will be approached after installation. The maximum error is 10%. Illuminance difference map Desktop illumination map (in accordance with the requirements of the client green area 200Lux) Share actual app photos ​ ​ ​ It is recommended to start directly with 120W, not because of power consumption. In fact, for a general CNC factory or a storage area. (In fact, it can be said to be a universal specification) There are two options for the same 120W option: Hanging type / E40 lamp holder 1.Hanging type - suitable for C-shaped steel, with chain to adjust the height of the lamp.2.E40 lamp holder long type - suitable for taking the original mercury lamp holder. ​​ Specifications link https://www.prodigital.com.tw/hot_302301.html CNC Factory LED High Patio Light / 120W LED High Patio Light / Factory Planning LED Patio Light / Replacement Mercury Light / E40 LED Light Bulb / HLG Power Supply / 135lm/W 2021-07-27 2022-07-27
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_302301.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_302301.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2021-07-27 http://schema.org/InStock $NT 0 https://www.prodigital.com.tw/hot_302301.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C.
Introduce a product that is most suitable for parking lot lighting, radar (microwave) automatic sensor tube / LED T8 Radar Tube(Free change circuit / system Free / Low maintenance / longevity / highest energy)Parking lot lighting is 24 hours use, choose high efficiency with sensor light selectionMaking the car park lighting can save 85%~90% electricity.There is no need to invest in the cost of system setup, not to adjust the circuit, and the maintenance cost is very low and easy in the future.Therefore, the basement parking lot is adopted, so that the reduction of electric power can also enhance the lighting quality of the parking lot.Under the same conditions to provide better options, it is particularly recommended LEDT8 radar sensor lamp,Immediately improve the reduction of electricity prices and get rid of the problems of setting up the system, which can improve the lamp life and reduce the maintenance cycle.Example: Infrared sensor PIR control lamps, from the original control of the indoor staircase lights, corridor lights, etc.,The majority of incandescent lamps are used, and the control is more convenient. There are also fluorescent lamps, but the life is greatly reduced and the stroboflash phenomenon is also serious.Along with the phase-out of incandescent lamps and the popularization and application of LED light sources, it brings an extremely wide range of applications to infrared sensors.The cost of lighting control is gradually reduced, the cost performance is continuously improved, and the energy-saving effect is more obvious.Infrared Sensor Introduction - Works through infrared radiation emitted by the human body.The infrared radiation emitted by the human body is enhanced by the Fresnel filter lens and accumulated on the pyroelectric element. When the human body is active, the infrared radiation isChanges in the firing position cause the device to lose its electrical balance and convert it into an electrical signal, ie thermoelectric conversion.The normal temperature of the human body is about 36 degrees, and the far-infrared peak emitted is 9.4 meters. By detecting body surface temperature and ambient temperatureThe difference in the degree of change, the resulting electrical signal, to determine whether someone is active and output the signal. There are many types of infrared sensors, applicationsAlso widely used, there are many types of sensor element performance and lens design, generally divided into large area type and small area type.In recent years, miniature sensors have been developed to be installed in lighting fixtures, such as garage lamp series, staircase lamp series, and hotel customer lighting series.Infrared sensors have been widely used due to their relatively low prices and generally do not require adjustments.When designing a lamp, its characteristics and use environment should be grasped, sensors should be applied correctly, and efforts should be made to reduce the cost of the lamp.Radar sensor introduction - Radar (microwave) sensor application. Example: Automatic glass door sensors use radar sensorsThere are many cases and the history is very long. In the early stage, it was widely used in military, shipping, automotive, level measurement, and life exploration.Product performance is stable and reliable. The distance of action is related to the pulse width and the vertical width of the beam, such as the pulse width of 0.01 microseconds, the distanceResolving power is about 25M. Radar is a device that detects and measures target information by emitting electromagnetic waves and echoes.This feature enables the independent control of the lamps to achieve the most efficient energy saving.Comparison of advantages and disadvantagesFeaturesHuman sensing infrared type (PIR)Radar (Microwave) Type 3.6GSensing distanceWithin 5 metersWithin 13 metersSensing range10m²-20m²20m²-40m²Conditions of UseLimit the scope of useWide range of useAdvantagesLow power, low priceLow power, high sensitivity, no blind areaShortcomingsEasily interfered by various heat sources, poor penetration,blind areaUsed in low flow areas, prices are slightly higherlifespan4 year8 yearProduct Specifications:(LED T8 Radar Tube) Apply Movie 1: https://youtu.be/y-Ue8qtkvwsApply Movie 2: https://youtu.be/h7B29KblvyMhttps://www.prodigital.com.tw/c45a7b02fcba9f97bd7a1c00e758bde4.jpg https://www.prodigital.com.tw/hot_278926.html Basement parking LED lighting options? [LED T8 Radar Tube] [LED tube Microwave control] 2021-07-27 2022-07-27
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_278926.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_278926.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2021-07-27 http://schema.org/InStock $NT 0 https://www.prodigital.com.tw/hot_278926.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C.
The combination of solar energy and street lamps has become the trend and trend of the world.The application of LED street light is the most suitable choice. The main reason:1 installation height and installation position, very in line with the street lamp2. The accessories are small and easy to hide in the fixture3. Can reduce the time to build 70% of street lamps4. Reduce the cost of 50% piping wiring5. Reduce maintenance time6. Environmental Protection and Energy Saving   The above conditions are most suitable for solar street lamps: Park, pond, gardens, villas, bike paths and township roads, farming community, community, Hospitals, schools, factories, houses, camps, open areas, remote areas ... and so on.   Widely in various outdoor lighting, with infrared body sensors, Better anti-theft warning function, enhance the effectiveness of security. What is ALL-in-one type? Simultaneously with LED light source, the human body sensors, solar cells, lithium batteries, photoelectric control module, comprising a number of protection.       How it works: During the day, solar energy can be used as a basis for power generation. Light energy can be converted into electricity and stored in a lithium battery pack. After the solar panel detects the potential difference at night, it starts a fully charged lithium battery pack during the day. So that the lithium battery stored electrical energy supplied using LED lights, dimming the brightness settings through the internal mechanism, The use of performance will be sent to the maximum, to avoid excessive use of lithium batteries lead to reduced service life,   Our advantage: 1. Complete controller and collocation, so that the lithium battery pack will not be damaged due to its reduced life due to overcharge or overdischarge. 2. The efficiency of the single-crystal type of solar cells is higher than that of polycrystalline silicon, so that the lithium battery pack can fully charge the lithium battery pack under low sunlight. 3.LED power lithium battery pack + solar panel power balance. 4. The lithium battery pack is a cylindrical battery type, and the discharge charge life quality is superior to that of the soft pack type. 5. The normal charge 6-8 small can use three nights, if there is over-discharge, it will be automatically protected. (Shortly removed without use for more than 3 months, be sure to remove sunlight for charging for 2 days) 6. Accurate light control time, providing a safe lighting environment, automatic lighting time is about sunset, close before sunrise. (Taiwan is an example of automatic summer evening after 6 o'clock in the evening, 1 hour early in winter, closed at 5 o'clock in summer and 1 hour in winter) 7. Eliminating the need to set up the switch power supply box and the mains buried pipe wiring, without the burden of secondary maintenance 8. Normal warranty for two years, follow-up warranty replacement of batteries or other consumables, no bad does not change.   Product specifications 10W LED solar street light, recommended height 3 meters, luminous flux 200 ~ 1,000lm (20% ~ 100% dimming) 30W LED solar street light, recommended height 5 meters, luminous flux 720~ 3,600lm (20% ~ 100% dimming) Long bright version 10W LED solar street light, recommended height 3 meters, luminous flux 1,000lm (solar and battery increase) Camping use - up to 2.5 meters Community courtyard - left before use / right after use Garden application The above conditions are most suitable for solar street lights: parks, ponds, gardens, villas, bicycle paths and township roads, agricultural communities, communities, hospitals, schools, factories, houses, camps, open areas, remote areas, etc. https://www.prodigital.com.tw/hot_278314.html Solar Street Light / LED Solar Light / Solar Power Lighting / Body Sensing Lighting / Solar Lighting / Outdoor Parking Lighting 2021-07-27 2022-07-27
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_278314.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_278314.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2021-07-27 http://schema.org/InStock $NT 0 https://www.prodigital.com.tw/hot_278314.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C.
分享LED高天井燈取代500W水銀燈,場地拍照並量測數據. 中心照度-約100lux 3000K 【場地】500瓦水銀燈效果.  26米長9.5米寬7米高,燈具間隔5米一盞.   【水銀燈的問題】 ①開燈時間大概3~5分鐘,關畢重新啟動需要5~10分鐘. ②燈泡損壞機率低,可是光衰的速度很快. ③拆裝容易,但需要在7米高空作業. ④500瓦水銀燈取得便宜,長時間來計算電費較高.   【建議與討論】 建議採用80瓦LED高天井燈,取代目前的500瓦水銀燈, 經討後客戶怕太暗,希望採用120瓦的LED高天井燈, 為了讓客戶了解建議的目的,則提供一盞120瓦LED高天井燈驗證.   經過兩天後客戶回應,因為太亮導致作業人員覺得不舒服, 經過照度計測量,120瓦LED高天井燈中心照度500Lux, 天花板明顯反光,事實上,客戶了解建議的原因了. 120瓦LED高天井燈效果. 建議120瓦 LED高天井燈用於10米高的場合! ​ 80瓦LED高天井燈 單盞 & 500W瓦水銀燈 單盞效果對照. 【測量】單盞中心照度約220Lux  【模擬比對】單盞中心照度約200Lux 經過三天驗證後,客戶滿意的購買三台80瓦LED高天井燈. 80瓦LED天井燈效果,現場光線均勻分佈於天花板與地板間. 【80瓦LED天井燈三盞模擬數據】 規格: PD-HB 80W LED 天井燈 https://www.prodigital.com.tw/hot_207346.html 500W Mercury Lamp, Replacement 80W LED Patio Light High Patio Light (for 5 ~ 12 meters high) 2021-07-27 2022-07-27
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_207346.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_207346.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2021-07-27 http://schema.org/InStock $NT 0 https://www.prodigital.com.tw/hot_207346.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C.
This is the introduction of special lighting  is it [mobile LED soccer light group].Applicable to outdoor camping, field camping, outdoor activities, night football, fish / boat, equipment lighting, auxiliary lighting, solar lamps, CNC equipment lights, truck lights, Hummer car lights.Product Features:◆ high efficiency and low power, the weight of the most compact and short size. (0.45kg / 157x110x36mm)◆ high color CRI> 80, greatly enhance the night lighting more clearly.◆ Die-cast aluminum housing, good shock resistance and high stability.◆ front sealed waterproof design: can withstand harsh environments such as heavy rain or high humidity use.◆ All-in-one optical lens to enhance efficiency, and use PC material scratch more durable.◆ Wide voltage input: can be used for a variety of different types of vehicles and boats. (12 / 24V can be used)Long-life lamps and lanterns: Specified 130lm high efficiency Taiwan 3030LED chip, life expectancy greater than 30,000 hours.◆ Overall warranty of two years, two years are replaced by new products. (Use error not warranty)A set of standard products: light group as follows (battery + waterproof battery backpack and charger is optional)Specification I: The two lights with a light poleTwo 20-watt outdoor waterproof floodlight & a 2.5-meter iron telescopic adjustable pole & dedicated 2.5-meter line groupSpecification II: The four lights with a light poleFour 20-watt outdoor waterproof floodlight & a 2.5-meter iron telescopic adjustable pole & dedicated 2.5-meter line groupRecommendations:◆ Battery capacity 12V / 22AH about two lights about 5 to 6 hours, four lights about 2.5 to 3.5 hours.◆ pole extension 2.5 m wind speed of less than 41~51km/h can be used, be sure to attach the battery to the bottom of the adjustment screw.(Such as excessive crosswind, please use to reduce the height of the pole to prevent damage down products and crushing people around)---------------------------------------------------------------------------------------------------Product Application: Hsinchu County, Dongxing National Primary School Night Football Lighting Group use caseSite size: 40x40 metersLighting erection: 4 sets (The four lights with a light pole)Outdoor soccer  lights appearance.(The four lights with a light pole)After thelights is in the predetermined position, the waterproof electric pack hangs on the most bass adjustment screw.(Battery weighs about 6.3 kg + lamp 2.5 kg + pole 4 kg + 0.5 kg line group, the total weight of 13 kg, enough to resist 41~51km/h wind speed )Dusk lights begin to adjust the angle to the best.The first half by the cosmic football team - Xu coach guidance, young and old classes to lead school age 3 years old to 4 years old, football training and confrontation.A variety of angles outside the actual shooting.(The two lights with a light pole)The location of these lamps and angle adjustment, the actual application of the simulation in advance, and the actual measurement, the guidance of coaches to complete the guidance.Outdoor football lighting should avoid lighting, too bright or angle and light and shade, leading players fear of photophobia or eye fatigue,Resulting in poor training, or easy to make players injured, extending the easy visual fatigue.The first half of the test - young children can only support 1 hour. (Performance is very exciting)---------------------------------------------------------------------------------------------------The second half by the Hsinchu County Dongxing National Primary low-grade football team practice - Hsinchu County Dongxing National Primary School Peng coach guidance.A variety of angles outside the actual shooting.After 1.5 hours of training and confrontation, verify the angle and height of lamps and other aspects of confirmation, leaving the data and analog comparison. Finally, the light catch light, so that students and coaches pack ball.Light storage is also very fast and easy, light pole with the same bag, the battery itself is a bag.---------------------------------------------------------------------------------------------------Proven double lamp and four lamp pole group can be used in 40x40 meters, the difference in brightness is sufficient.Special thanks to Hsuchu Universe Football Team - Xu Coach and Pang Coach, Dongxing National Primary School, Hsinchu County.Thanks to NORK TECHNOLOGY.CORP.,LTD for sponsorship, giving us the opportunity to assist and learn the whole process,Allow students to play football in moderate lighting, but also enjoy the joy of playing football.---------------------------------------------------------------------------------------------------For lighting assessment of football or other activities, or purchase the entire product, welcome to inquire. https://www.prodigital.com.tw/hot_254530.html Mobile LED soccer light group / Outdoor IP67 2021-07-27 2022-07-27
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_254530.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_254530.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2021-07-27 http://schema.org/InStock $NT 0 https://www.prodigital.com.tw/hot_254530.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C.
Mobile phone repair station uses 12 watts 6000K Downlight 16 results. Indoor effect Reference illuminance The floor  Service Desk Workbench Above using PD-DL 12W 15 cm down light, each lamp only 13 LED,produces 1000lm. Two years warranty & non-blue eye damage. Simple and comfortable, naturally lit storefront obvious customers like ~ Product Link https://www.prodigital.com.tw/hot_193986.html 12W OSRAM LED Down Light Case Studies 2021-07-27 2022-07-27
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_193986.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_193986.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2021-07-27 http://schema.org/InStock $NT 0 https://www.prodigital.com.tw/hot_193986.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C.
Cases share office makeover 【Completion photos】 The process Sharing! 【Original photo】 Original installation 64 T5 lamps, with a total power consumption (22 days * 10 hours * 30 watts * 64) = 422,400 watts / month Illuminance approximately 500 ~ 650Lux room, after one year began to damage, Customers can not pick the frequency of replacement and labor costs, it is proposed to LED panel light.   【Simulation】 Choose natural light to enhance the brightness and low glare advantage, effectively enhance the use of life, does not irritate the eyes.  Workflow Light demolition Protection Demolition decoration Confirm location Opening and removing scrap Size Verify Cutting boards and test fixture Job change sides Wiring and lighting on Location Protection before painting Confirm switch Illumination Test - Flooring Illumination Test - Desktop Illumination Test - Wall Illumination Test - Corner Duration 4 days decoration / electrician / lighting / paint / cleaning / measurement,Power calculation: The total power consumption (22 days * 10 hours * 40 watts * 18) /1000=158.4 degrees / monthDescription of the difference:Consumption:                      422.4 down to 158.4 eliminating 60% of the electricity.Illumination:                     500 ~ 650Lux raised to 750 ~ 960Lux brightening 10 to 20%.Life:                     Two years warranty, reduce the purchase cost and replacement cost.Temperature:                      Decreased by 2 to 5 degrees.Thank you enlighten above, Product specifications Link http://www.prodigital.com.tw/zh/product_750444.html LED questions link http://www.prodigital.com.tw/zh/custom_cg10267.html https://www.prodigital.com.tw/hot_193983.html Natural light 4000K (2 feet * 2 feet) Panel Lights 40W 3300lm 18 units, replacing 64 units 4 feet T5 tube. 2021-07-27 2022-07-27
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_193983.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_193983.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2021-07-27 http://schema.org/InStock $NT 0 https://www.prodigital.com.tw/hot_193983.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C.
36-watt OSRAM LED ultra-thin plate lights & lighting installation process evaluation.Use LED light source 100PCS replace T8 light source 138PCS. A area using T8 / T-bar 91 PCS, power consumption 7.28kw / h B area using T8 / T-bar 47P CS, power consumption 3.76kw / h A + B total 11.04 kw/h, tariff calculation: 8hx 11.04kw/h x $4.5➨NTD397.44/Day  ➨NTD104,924/year  Before replacing the photo. After evaluation recommendations, the owners use our new program to replace the lamp position. A area is reduced from 91PCS to 63PCS B area is reduced from 47PCS to 37PCS.Lamps reducing the total 38PCS, decline of 27%. After replacing the A area and B zone total power consumption, the remaining hour 3.6kw / hDay tariff calculation: 8hx 3.6kw/h x $4.5➨NTD129.6/Day ➨NTD34,214/year  1 year save NTD70,710 !!! (67% reduction in electricity bills.) --------------------------------------------------------------------------- Using Simulation software planning lighting position to avoid insufficient illumination! Floor height of 2.6 m, an average illuminance planning desktop 550 ~ 700lux.  Simulation than after, the planning installation time.--------------------------------------------------------------------------- Day 1:Before installation, the main items covered to avoid dust and rat feces fall. Removing the old lamps By planning the installation of lighting. According to the requirements of owners retain some lamps. The next area. Replacing lamps also keep the environment clean and tidy. Lamp holder and lamp separation recovery! Lampholder recovery!  -----------------------------Day 1 END---------------------------------Day 2 :  Lamp holder and lamp separation recovery! Lampholder recovery!  B area illuminance measurements. A area illuminance measurements.   Conclusion : 1. Lamp less 38PCS.2. The power consumption drops 15,713.28kw / years.3. The cost savings NTD70,710 / years.4. Life of up to 40,000 hours.5.UV free.6.eye safety.7. enhance lighting quality.8. reduce the indoor temperature 2 to 3 degrees.9. easy to clean, reducing maintenance costs.10. The two-year warranty, the new replacement. Using OSRAM 5630 LED intensity higher than 2835 commercially available.2 meters Panel Light illumination 360lux, better than the commercial lighting 250lux ~ 300lux performance.Each batch are tracked by integrating sphere record. share it!Web : www.prodigital.com.twTaiwantrade : http://prodigital.en.taiwantrade.com/ https://www.prodigital.com.tw/hot_203083.html Production lines / Operating area to replace the thin OSRAM LED Panel Light 2021-07-27 2022-07-27
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_203083.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_203083.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2021-07-27 http://schema.org/InStock $NT 0 https://www.prodigital.com.tw/hot_203083.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C.
In addition to remedial teaching and counseling children, should pay attention to light is sufficient. A lot of people did not pay attention cause of myopia, it turned out to be long-term in insufficient light! This light, the children very happy - because parents brightly lit without glare. The industry's only two meters illumination 360Lux, this is not to increase the use of LED or super power to let a lamp reaches 360Lux,   NOTE: In order to enhance the illumination color temperature required to reduce 3500 ~ 5500K,     Germany LED light source no UV, blue light hazard rating 0. PROD insists Taiwan manufacture, integration export commodity! Product warranty for two years, to avoid secondary pollution caused by LED product, but also provides constant new digital goods through warranty service! Used also with peace of mind for a long time, it is in response to environmental protection and energy saving. Mutual understanding more beautiful future, PROD willing to pay an effort for the Environment! Power Comparison: LED panel light 36W V.S. T5 60W V.S. T8 80W PS: save half electricity, reduce ambient temperature for 2 to 3 degrees, air temperature was adjusted to 26 to 27 degrees.       https://www.prodigital.com.tw/hot_199283.html Demonstration classroom -LED lamp mounting plate example. 2021-07-27 2022-07-27
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_199283.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_199283.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2021-07-27 http://schema.org/InStock $NT 0 https://www.prodigital.com.tw/hot_199283.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C.
http://prodigital.en.taiwantrade.com/   https://www.prodigital.com.tw/hot_215354.html Taiwantrade Link 2021-07-27 2022-07-27
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_215354.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/hot_215354.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2021-07-27 http://schema.org/InStock $NT 0 https://www.prodigital.com.tw/hot_215354.html